Dr Yong Pang
Postdoctoral Research Assistant
School of Engineering and Materials Science
Queen Mary University of London
Queen Mary University of London
Publications
Publications of specific relevance to the Centre for Intelligent Transport2025
Anisotropy of 316 L stainless steel foil and its effect on the forming processXu C, Huang S, Li Z, Cai Y, Li H and Pang Y
Materials Today Communications, Elsevier vol. 45
01-04-2025
2024
Ultra-soft cellular solids inspired by marine mussel plaques: scaling of the mechanical propertiesPang Y, Busfield J and Liu T
Proceedings of The Royal Society A, The Royal Society vol. 480 (2300), 20240257-20240257.
16-10-2024
Elastic–plastic strain conversion of a thin-plate miniaturized tensile test based on crosshead measurement via an analytical methodPang Y, Huang S, Li H, Liu T and Sun W
Theoretical and Applied Fracture Mechanics, Elsevier vol. 133
01-10-2024
Assessment of the Desiccation Cracking Characteristics of Clay Reinforced with Fibers Utilizing the Distributed Optical Fiber Sensing (DOFS) TechniqueChaduvula U, Wong L, Shannon B, Pang Y, Viswanadham BVS and Kodikara J
Indian Geotechnical Journal, Springer Nature, 1-16.
28-09-2024
Anisotropic Plasticity Behavior of Rolled 316L Ultra-Thin Sheet and Its Application to Micro-Deep Drawing ModelingHu J, Huang S, Shang L, Li H and Pang Y
Journal of Materials Engineering and Performance, Springer Nature, 1-11.
23-09-2024
Quasi-static responses of marine mussel plaques detached from deformable wet substrates under directional tensionsPang Y, Sun W and Liu T
Proceedings of The Royal Society A, The Royal Society vol. 480 (2290)
01-05-2024
Virtual laboratory enabled constitutive modelling of dual phase steelsLiu W, Li X, Liu M, Cui H, Huang J, Pang Y and Ma J
International Journal of Plasticity, Elsevier vol. 175
01-04-2024
Anisotropic plasticity deformation during micro-deep drawing of 304 foils: An experimental and numerical investigationShang L, Huang S, Hu J, Li H and Pang Y
International Journal of Material Forming, Springer Nature vol. 17 (3)
15-03-2024
Unveiling the deformability of mussel plaque core: the role of pore distribution and hierarchical structureLyu Y, Tan M, Pang Y, Sun W, Li S and Liu T
Soft Matter, Royal Society of Chemistry (Rsc) vol. 20 (37), 7405-7419.
01-01-2024
Determining hyperelastic properties of the constituents of the mussel byssus systemLyu Y, Pang Y, Liu T and Sun W
Soft Matter, Royal Society of Chemistry (Rsc) vol. 20 (11), 2442-2454.
01-01-2024
2023
Creep characterisation of Inconel 718 lattice metamaterials manufactured by laser powder bed fusionBhuwal AS, Pang Y, Maskery I, Ashcroft I, Sun W and Liu T
Advanced Engineering Materials, Wiley
01-09-2023
Unravelling the effects of ratcheting and constraint on the cyclic behaviour of a martensitic steel under elevated temperatureRagab R, Pang Y, Liu T, Neate N, Li M and Sun W
Mechanics of Materials, Elsevier, 104708-104708.
03-06-2023
Multi-scale modelling of evolving plastic anisotropy during Al-alloy sheet formingLiu W, Huang J, Pang Y, Zhu K, Li S and Ma J
International Journal of Mechanical Sciences, Elsevier vol. 247
01-06-2023
Discovery of quasi-disordered truss metamaterials inspired by natural cellular materialsBhuwal AS, Pang Y, Ashcroft I, Sun W and Liu T
Journal of The Mechanics and Physics of Solids, Elsevier, 105294-105294.
08-04-2023
2022
Experimental investigation on microstructures and mechanical properties of PG4 flash-butt rail weldsPang Y, Grilli N, Su H, Liu W, Ma J and Yu SF
Engineering Failure Analysis, Elsevier vol. 141
01-11-2022
Data-driven design of high ductile metamaterials under uniaxial tensionBhuwal AS, Pang Y, Liu T, Ashcroft I and Sun W
02-09-2022
2021
A multi-scale modelling framework for anisotropy prediction in aluminium alloy sheet and its application in the optimisation of the deep-drawing processLiu W and Pang Y
International Journal of Advanced Manufacturing Technology, Springer vol. 114 (11-12), 3401-3417.
25-04-2021
2020
The structural integrity of flash-butt welded premium rail steel – Evaluation of strength, microstructure and defectsMicheletto A, Cookson J, Pang Y, Chen B and Mutton P
Proceedings of The Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit, Sage Publications vol. 235 (8), 1006-1012.
06-12-2020
A 3D phenomenological yield function with both in and out-of-plane mechanical anisotropy using full-field crystal plasticity spectral method for modelling sheet metal forming of strong textured aluminum alloyLiu W, Chen BK, Pang Y and Najafzadeh A
International Journal of Solids and Structures, Elsevier vol. 193, 117-133.
01-06-2020
Enhanced laser speckle optical sensor for in situ strain sensing and structural health monitoring.Pang Y, Chen BK, Yu SF and Lingamanaik SN
Optics Letters, Optica Publishing Group vol. 45 (8), 2331-2334.
09-04-2020
Development of a non-contact and non-destructive laser speckle imaging system for remote sensing of anisotropic deformation around fastener holesPang Y, Chen BK, Liu W, Yu SF and Lingamanaik SN
Ndt & E International, Elsevier vol. 111
01-04-2020
Measurement of deformation of the concrete sleepers under different support conditions using non-contact laser speckle imaging sensorPang Y, Lingamanaik SN, Chen BK and Yu SF
Engineering Structures, Elsevier vol. 205
01-02-2020
2019
Numerical investigation of evolution of earing, anisotropic yield and plastic potentials in cold rolled FCC aluminium alloy based on the crystallographic texture measurementsLiu W, Chen BK and Pang Y
European Journal of Mechanics - a/Solids, Elsevier vol. 75, 41-55.
01-05-2019
An investigation of plastic behaviour in cold-rolled aluminium alloy AA2024-T3 using laser speckle imaging sensorPang Y, Chen BK and Liu W
The International Journal of Advanced Manufacturing Technology, Springer Nature vol. 103 (5-8), 2707-2724.
26-04-2019
2018
A new temperature-dependent anisotropic constitutive model for predicting deformation and spring-back in warm deep drawing of automotive AA5086-H111 aluminium alloy sheetLiu W, Chen BK and Pang Y
The International Journal of Advanced Manufacturing Technology, Springer Nature vol. 97 (9-12), 3407-3421.
25-05-2018